Styro Pro High Strength Water Based Premixed Acrylic Paste Adhesive. Pack of 4 Tubes. Easy to use. Works Great with PVC and Foam Ceiling Tiles. Perfect for Styrofoam Crown moldings.

Brand: Styro Pro

Color: White

Features:

• Has no smell - water based glue
• Highly flexible and will not crack over time.
• Has strong initial grab and can be painted over with any suitable paint.
• Can also be used to fill in holes and small gaps and any inconsistencies in the walls or ceilings.
• One tube is 280 ml

Details: About our Styro Pro adhesive
Styro Pro Adhesive is a high strength water based premixed acrylic paste adhesive that can be used to bond polystyrene ceiling tiles and other decorative products such as PVC ceiling tiles,
polystyrene crown moldings, styrofoam tiles, and lightweight wall panels to most construction surfaces such as, popcorn ceiling, cement, gypsum, plaster, polyurethane, polystyrene, painted surfaces and wood.

SPECIFICATIONS:
- One tube is 280 ml
- Water based glue, has no smell
- One tube is enough to install 12-14 PVC tiles ( ~2'x2' each tile), or 14-16 Styrofoam tiles ( ~19.6"x19.6" each tile)

FEATURES:
- Highly flexible and will not crack over time
- Can be Painted over with any suitable paint
- Can also be used to fill in holes and small gaps and any inconsistencies in the walls or ceilings.

SURFACE PREPARATION:
- Ceiling tiles should only be glued to clean, dry surfaces that are free of any loose particles.
- For best adhesion, roughen wall and ceilings with sandpaper. Use a clean brush to remove any dust.

APPLICATION:
- Cut the tip of the cartridge above the thread.
- Cut the tip of the nozzle to the desired bead size and screw the nozzle onto the cartridge.
- Apply the adhesive as per the product installation instructions.
- Wipe off excess adhesive with a damp sponge or cloth before it has dried.
- Allow 24 hours to dry completely.
Please note : if adhesive is applied to wet surfaces the drying time will increase substantially!

Package Dimensions: 9.7 x 4.3 x 4.3 inches