24V 30W Solar Battery Trickle Charger Maintainer with Rear-mounted Intelligent PWM Controller/SAE Cable Waterproof Solar Panel for 24V Rechargeable Battery of Car RV Marine Tractor Boat Motorcycle ATV

Brand: TCEUMIK

Color: Black

Features:

• Charge and Maintain 24V Batteries: This 30W 24V solar panel is used for charging or maintaining 24V rechargeable batteries such as lead-acid batteries, AGM, GEL, SLI, SLA, EFB, MF, marine, deep cycle batteries, lithium-ion(li-ion)batteries, LifePO4, LiCoO2, LiMn204, NMC, NCA, LTD, nickel-cadmium(NICD) and nickel-metal hydride(NIMH)batteries, makes sure the battery remains fully charged. (Note: Our solar panels have been rear-mounted controller and cannot charge mobile power stations that already have built-in controller.)
• Higher Efficiency: This 30W 24V solar panel uses A+ class N-type module cells and high-quality monocrystalline silicon, is less affected by temperature, and generates electricity efficiently under various temperature conditions, with a conversion rate as high as 23%. Even on cloudy days, you can use the extra light to charge the battery and enter maintenance mode after a full charge to keep your battery at its best charging performance and extend its lifespan.
• Intelligent 24V PWM Controller: Equipped with innovative PWM technology, the tracking efficiency of solar panels can reach up to 99%, the peak conversion efficiency can reach up to 98%, and the charging efficiency is 20% to 30% higher than that of most other controllers. The newly upgraded three-stage charging algorithm (batch charging, absorption charging, and float charging) effectively prevents overcharging, overvoltage, overload, and short circuit of the battery, ensuring safe battery charging, extending battery life and performance, and it does not absorb any energy from the battery.
• Maintenance-free: The rear controller can display the battery capacity (25%, 50%, 75%, 100%), battery type (Gel, AGM, Lithium), and working status. The solar panel stops charging when the battery is fully charged and automatically resumes charging when the battery discharges, requiring no maintenance at all. IP67 waterproof design to prevent component oxidation.
• Comprehensive Protection: The newly upgraded PWM technology can fully ensure battery safety, preventing overcharging, overdischarging, overvoltage, overcurrent, overload, short circuit, reverse polarity, and over-temperature. The TCEUMIK solar cell charger ensures that your battery is comprehensively protected, not only during charging but also during maintenance, extending its service life.
• Sturdy and Durable Frame: Low-iron tempered glass, transparent EVA film, N-type monocrystalline silicon cells, waterproof backsheet molds and anti-corrosion aluminum alloy frames make solar panels strong and durable. It can withstand extreme conditions such as ultraviolet rays, rust prevention, erosion, strong winds (2,400Pa), hail, snow (5,400Pa), sandstorms, high and low temperature environments (-40°F to 176°F).
• Low Degradation Rate: This 30W 24V solar panel module uses a 12BB power grid line, resulting in an even lower degradation rate, with an annual degradation rate of only 0.5%. The degradation rate is relatively slow, and the service life of solar panels can reach 25 years. Bring you an outstanding outdoor solar charging experience.
• Wide Compatibility: TCEUMIK's 30W 24V solar panel is not merely a solar cell charger, but also an advanced solar cell maintainer. For 24V Gel(24V Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries) , 24V AGM and 24V Lithium (including lithium iron phosphate). It is an ideal choice for all kinds of vehicles, cars, ships, recreational vehicles, boats, dump trailers, ATVs, door openers, lawn mowers, and electric fence batteries.
• Easy Installation: The design of the solar car battery charger is convenient for installation. There are 8 pre-drilled holes on the back of the frame, making installation easy. It is suitable for different locations such as roofs, RVS, cars, utility poles, and walls, meeting various installation requirements. The controller is equipped with a plug-and-play SAE connector, making it easy to connect and disconnect.
• Reliable Customer Service: TCEUMIK offers 24/7 online customer service to ensure you get help when you need it. We also offer a 12-month after-sales service to make you feel more at ease after your purchase. If you have any questions, please contact us.

model number: 30W Solar Panel

Details: 30W 24V Mono Solar Panel Specifications:

Rated Power：30W
Solar Cell：Monocrystalline
Max. Voltage(Vmp)：36V
Open Circuit Voltage(Voc)：43.2V
Short Circuit Current：0.99A
Max. Current：0.83A
Frame：Aluminum alloy frame
Length of Extension Cable：300cm(9.8ft),0.75mm²(18AWG)
Solar Panel Weight：1.4kg (3.08lb)
Size：395x462x17mm(15.5x18.18x0.67 in)
Mount Bracket：No
Waterproof Degree: IP67

What You Get:

1* 30W 24V Solar Panel
1* 24V PWM Charge Controller
1* SAE Extension Cable
1* Solar Cables(O-ring Cable)
1* Solar Cables(Alligator Clip)
1* English Operation Manual

Package Dimensions: 18.9 x 16.0 x 1.5 inches